BHC605 60cm touch control ceramic hob

Size: px

Start display at page:

Download "BHC605 60cm touch control ceramic hob"

Eustace Davidson
5 years ago
Views:

1 1 BHC605 60cm tuch cntrl ceramic hb

User Manual fr yur Baumatic BHC605 60 cm Frnt tuch cntrl 4 zne ceramic hb.

2 User Manual fr yur Baumatic BHC cm Frnt tuch cntrl 4 zne ceramic hb. NOTE: This User Instructin Manual cntains imprtant infrmatin, including safety & installatin pints, which will enable yu t get the mst ut f yur appliance. Please keep it in a safe place s that it is easily available fr future reference; fr yu r any persn nt familiar with the peratin f the appliance. DD 31/10/08 2

3 Cntents Envirnmental nte 4 Imprtant safety infrmatin 5 8 Specificatins 8 10 Ceramic hb layut 9 Cntrl panel layut 10 Using the ceramic hb Befre first use 10 Tuch cntrls 10 Switching the hb tp n 11 Switching n a zne and setting a pwer level 11 Switching ff a zne 11 Switching ff the hb 12 Residual heat indicatr 12 Lcking the hb tp 13 The hb timer Setting a cuntdwn time 14 Safety cut-ff 15 Hb guidelines Cleaning and maintenance Cleaning the ceramic hb tp 17 After each use 17 Cleaning table 17 Using a ceramic hb scraper 18 Using a specialist ceramic hb cleaner 18 Installatin Psitining 19 Unpacking the appliance 19 Installing the appliance Electrical cnnectin 22 Cnnecting the mains supply cable Replacing the mains supply cable 24 My appliance isn t wrking crrectly Cntact details 26 3

4 Envirnmental nte The packaging materials that friendly and can be recycled. Baumatic uses are envirnmentally Please discard envirnment. all packaging material with due regard fr the 4

5 Imprtant safety infrmatin Yur safety is f the utmst imprtance t Baumatic. Please make sure that yu read this instructin bklet befre attempting t install r use the appliance. If yu are unsure f any f the infrmatin cntained in this bklet, please cntact the Baumatic Advice Line. General Infrmatin This appliance is designed fr dmestic husehld use and fr the cking and frying f dmestic fdstuffs. IMPORTANT: The adjacent furniture and all materials used the installatin must be able t withstand a minimum temperature f 85 C abve the ambient temperature f the rm it is lcated in, whilst in use. Certain types f vinyl r laminate kitchen furniture are particularly prne t heat damage r discluratin at temperatures belw the guidelines given abve. in Any damage caused by the appliance being installed in cntraventin f this temperature limit, will be the liability f the wner. Yur new appliance is guaranteed against electrical r mechanical defects, subject t certain exclusins that are nted in Baumatic s Cnditins Of Guarantee. The freging des nt affect yur statutry rights. The use f this appliance fr any ther purpse r in any ther envirnment withut the express agreement f Baumatic Ltd. will invalidate any warranty r liability claim. Yu shuld nt use this appliance t stre items n r as a wrk surface. N mdificatins t the appliance are permitted by Baumatic Ltd. Yu shuld nt stre r place flammable r highly flammable liquids/materials n tp f r near the appliance. Items made frm aluminium, plastic r plastic film shuld als be kept away frm the appliance, as they may fuse t the surface. Repairs may nly be carried ut by Baumatic Engineers r their authrised service agent. Service 5

6 Child Safety Baumatic strngly recmmend that babies and yung children are prevented frm being near t the appliance and nt allwed t tuch the appliance at any time. During and after use, all surfaces will becme ht. If it is necessary fr yunger family members t be in the kitchen, please ensure that they are kept under clse supervisin at all times. Older children shuld nly be allwed t utilise the appliance when supervised. General Safety The appliance shuld nly suitably qualified persn. be installed and cnnected by a Care shuld be taken t ensure that the units and wrk surfaces that yu build the appliance int, meet with the relevant standards. If yu ntice any scratches, splits r cracks in the ceramic glass, yu shuld immediately switch ff the appliance and discnnect it frm yur mains supply. Otherwise there is the risk f electric shck ccurring. During use Any film r stickers that are present n the hb surface when it is delivered shuld be remved befre use. Care shuld be used when utilising the there is a risk f burns being caused. appliance, therwise Yu shuld nt allw the electrical cnnectin cables t cme int cntact with the hb surface when it is ht r any ht ckware. If fat and il verheats, then it can ignite extremely quickly. Fr this reasn, when cking with fat and il the appliance shuld nt be left unattended. Make use. sure that all f the cking znes are switched ff after 6

7 Cleaning Cleaning f the hb shuld be carried ut n a regular basis. IMPORTANT: Befre attempting t clean the appliance, it shuld be discnnected frm the mains and allwed t cl. Great care shuld be taken whilst fllwing the cleaning prcedure. using this appliance and when Yu shuld nt use a steam jet r any ther cleaning equipment t clean the appliance. high pressure Installatin This appliance must be crrectly installed by a suitably qualified persn, strictly in accrdance with the manufacturer s instructins. Please see the specific sectin f this bklet that refers t installatin. Baumatic Ltd. declines any respnsibility fr injury r damage, t persn r prperty, as a result f imprper use r installatin f this appliance. Declaratin f cnfrmity This appliance cmplies with the fllwing Eurpean Directives: -73/23/EEC dated 19/02/1973 Lw Vltage Directive. -89/336/EEC dated 03/05/1989 EMC Directive inclusive f Amending Directive 92/31/EEC. -93/68/EEC dated 22/07/1993 CE Marking Directive. -89/109/EEC dated 25/01/1992 Materials that can tuch fd. The manufacturer declares that the hb is built using certified materials and requires the appliance t be installed in accrdance with the standards currently in frce. This appliance must be used by a trained persn fr dmestic purpses nly. T avid damaging yur appliance The ceramic glass can be damaged by bjects falling nt it. The ceramic ckware. glass edge can be damaged by kncks frm Cast irn and cast aluminium ckware with damaged bases may scratch the ceramic surface if they are dragged acrss it. 7

8 Pans shuld be lifted n and ff the hb surface and nt dragged. Cking znes shuld nt be switched n withut ckware placed n it. Als the ckware shuld nt be empty. Specificatins Prduct dimensins: Aperture dimensins: Height: 520 mm Height: 490 mm Width: 590 mm Width: 560 mm Depth: 52 mm Prduct specificatins: 2 x 1.80 kw hyperspeed znes (diametre 180 mm) 2 x 1.20 kw hyperspeed znes (diametre 145 mm) Frnt tuch cntrl peratin 4 individual residual heat indicatrs Safety lck Timer Standard accessries Ceramic hb scraper Electrical details Rated Vltage: Supply Cnnectin: Max Rated Inputs: Mains Supply Lead: 230 Vac 50 Hz 30 A (duble ple switched fused utlet with 3mm cntact gap) 6 kw 3 cre x 4 mm² (nt supplied) 8

9 Fr future reference please recrd the fllwing infrmatin which can be fund n the rating plate and the date f purchase which can be fund n yur sales invice. The rating plate f yur hb is lcated n the underneath f the appliance. Therefre it is a gd idea t recrd this infrmatin befre yu install yur appliance. Mdel Number Serial Number.. Date f Purchase. Ceramic hb surface layut 1) 1.20 kw hyperspeed znes (diametre 145 mm) 2) 1.80 kw hyperspeed znes (diametre 180 mm) 9

Cntrl panel layut 1. Safety lck buttn 2. Cking zne minus buttn 3. Cking zne indicatr 4. Cking zne plus buttn 5. Timer minus buttn 6. Timer display 7. Timer buttn 8. Timer plus buttn 9.

10 Cntrl panel layut 1. Safety lck buttn 2. Cking zne minus buttn 3. Cking zne indicatr 4. Cking zne plus buttn 5. Timer minus buttn 6. Timer display 7. Timer buttn 8. Timer plus buttn 9. ON/OFF buttn Using the ceramic hb Befre first use IMPORTANT: Yu shuld clean the ceramic hb surface (see Cleaning and maintenance sectin). Yu shuld switch n ne cking zne at a time, fr 5 minutes at the maximum setting. This will help t eliminate any new smell that exists and evaprate any humidity that has frmed n the heating elements during transit. D nt burn ff mre than ne zne at nce. Yu must place a saucepan filled half full with cld water n each zne as yu burn it ff. Tuch cntrls All peratins are perfrmed by means f the tuch cntrls that can be fund n the cntrl panel. Each tuch cntrl has a visual display that crrespnds t it. 10

Switching the hb tp n Press the ON/OFF buttn (9) t switch n the appliance. The hb will beep nce and all f the cking zne indicatrs will light briefly, then g ut.

11 Switching the hb tp n Press the ON/OFF buttn (9) t switch n the appliance. The hb will beep nce and all f the cking zne indicatrs will light briefly, then g ut. This means that the hb has entered stand-by mde. Switching n a zne and setting a pwer level IMPORTANT: A zne must be selected within 2 minutes f switching the hb n. Press the cking zne plus buttn (4) f the zne that yu want t use. Adjust the zne between pwer levels 1 and 9, using the plus (4) and minus (2) buttns. By hlding dwn either f these buttns, the value n the zne indicatr (3) will adjust up r dwn. Switching ff a zne Press the cking zne minus buttn (2) f the zne that yu want t switch ff. Hld the buttn dwn until the number in the cking zne indicatr reaches 0. After a few secnds, the zne will switch ff autmatically. The letter H will shw in the cking zne indicatr (3), (see the sectin n the residual heat indicatr n the next page). 11

12 Switching ff the hb Once yu have switched ff all f the cking znes, yu shuld turn ff the hb. Press the ON/OFF buttn (9). It is pssible t turn the hb ff at any time by pressing the ON/OFF buttn (9). The hb will switch ff autmatically after 2 minutes, if nne f the znes are in use. Residual heat indicatr After a zne is switched ff, the crrespnding cking zne indicatr (3) will shw a flashing letter H. This means that the temperature f the zne is ver 60 C and is therefre still high enugh t cause injury. When the temperature f the zne falls belw 60 C, then the letter H will g ut. IMPORTANT: The residual heat indicatr will disappear if the mains supply t the prduct is cut. IT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB ZONE, EVEN WHEN THE TEMPERATURE OF IT HAS DROPPED BELOW 60 C. 12

13 Lcking the hb tp The whle hb tp can be lcked by pressing the safety lck buttn (1) whilst the appliance is switched n. The timer display (6) will shw L0 t indicate that the safety lck feature has been activated. When the safety lck has been switched n, it will disable any f the ther buttns n the cntrl panel, apart frm the ON/OFF buttn (8). T disable the safety lck feature, yu shuld press the safety lck buttn (1) again. The L0 symbl will disappear frm the timer display (6) and yu are then able t adjust the pwer f any zne n the hb tp. The hb timer Yur hb has a timer which will cuntdwn a perid f time between 1 and 99 minutes. At the end f the cuntdwn perid an audible signal will sund. Use the timer plus (8) and minus buttns (5) t set the cuntdwn time. The timer display will shw the cuntdwn time that is being set. The timer display will increase in 1 minute intervals each time the timer plus buttn (8) is pressed. 13

14 The timer display will decrease in 1 minute intervals each time the timer minus buttn (5) is pressed. If the set time exceeds 99 minutes, the timer display will return t shwing 0. If yu press the timer plus (8) and minus buttns (5) simultaneusly, the timer display will reset t 0. Setting a cuntdwn time Press the ON/OFF buttn (9) t switch n the appliance. Press the cking zne plus buttn (4) f the zne that yu want t use. Adjust the zne between pwer levels 1 and 9, using the plus (4) and minus (2) buttns. By hlding dwn either f these buttns, the value n the zne indicatr (3) will adjust up r dwn. Press the timer buttn (7) and the timer display (6) will flash. Set the cuntdwn time that yu require, using the timer plus (8) and minus (5) buttns. Use the timer plus (8) and minus buttns (5) t set the cuntdwn time. When the cuntdwn time that yu require appears n the timer, stp pressing the timer buttns. The timer display (6) will flash fr 5 secnds, when it stps flashing; the cuntdwn time will be set. Or yu can press the timer buttn (7) again t cnfirm the cuntdwn time. An audible signal will sund t advise yu that the cuntdwn perid has elapsed. WARNING: The zne will still remain active after the cuntdwn perid has elapsed. Yu will need t turn the hb zne ff manually in the nrmal manner. 14

15 Safety cut-ff If ne r mre f the cking znes are accidentally left n, a safety cut ff will activate after a certain perid f time. The length f time depends n the pwer level that a zne r znes have been set n. LEVEL TIME LIMIT (hurs) If mre than ne zne is perating when ne f the znes reaches its safety cut-ff pint, nly the zne which has reached its safety cut ff pint will switch ff. Hb guidelines The first few times the hb tp is used, it may give ff an acrid, burning smell. This smell will disappear cmpletely with repeated use. The wrktp is fitted with cking areas f different diameter and pwer. The psitins where the heat will radiate frm are clearly marked n the hb tp. The saucepans must be psitined exactly n these znes fr efficient heating t ccur. Pans shuld have the same diameter as the cking zne that they are being used n. Yu shuld nt use saucepans with rugh bttms, as this can scratch the ceramic surface. Befre use, make sure that the bttms f the saucepans are clean and dry. When cld, the bttm f the pans shuld be slightly cncave, as they expand when ht and lie flat n the surface f the hb. This will allw the heat t transfer mre easily. 15

16 The best thickness fr the bttm f the pans is 2 3 mm f enamelled steel and 4 6 mm fr stainless steel with sandwich type bttms. If these rules are nt fllwed, then there will be a great lss f heat and energy. Heat nt absrbed by the saucepan, will spread t the hb, frame and surrunding cabinets. Preferably cver pans with a lid t permit cking at a lwer heat. Always ck vegetables and ptates, etc. in as little water t reduce cking times. Fd r liquid that has high sugar cntent may damage the hb tp if it cmes int cntact with the ceramic hb surface. Any spillages shuld be wiped up immediately, hwever this may nt prevent the hb surface frm becming damaged. IMPORTANT: The ceramic hb surface is tugh; hwever it is nt unbreakable and can be damaged. Especially if pinted r hard bjects are allwed t fall n it with sme frce. DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN OR CRACKED. YOU SHOULD CONTACT THE BAUMATIC SERVICE DEPARTMENT IMMEDIATELY. 16

17 Cleaning and maintenance Cleaning peratins must nly be carried ut when the hb is cl. The appliance shuld be discnnected frm yur mains supply befre cmmencing any cleaning prcess. Cleaning the ceramic hb tp Any residues that are left n the hb tp surface frm cleaning agents will damage it. Yu shuld remve any residues with warm water mixed with a little washing up liquid. Abrasive cleaners r sharp bjects will damage the hb surface; yu shuld clean it using warm water mixed with a little washing up liquid. Yu may find it easier t clean sme depsits whilst the hb surface is still warm. Hwever yu shuld take care nt t burn yurself if cleaning the hb surface when it is still warm. After each use Wipe the appliance ver with a damp clth. Dry the appliance by rubbing the surface with a clean clth. Cleaning table Type f depsit Sugar r fd/liquid cntaining sugar Remve immediately? Remve when the appliance has cled dwn? What shuld I use t remve the depsit? Yes N Ceramic hb scraper Tin fil r plastic Yes N Ceramic hb scraper Fat splashes N Yes Ceramic hb cleaner Metallic discluratin Water splashes r water rings N Yes Ceramic hb cleaner N Yes Ceramic hb cleaner 17

18 Using a ceramic hb scraper Yur appliance will be prvided with a hb scraper. The fllwing guidelines shuld als be fllwed when using the ceramic hb scraper:- The scraper shuld be placed n the ceramic surface at an angle. Residues shuld be remved by sliding the blade carefully ver the ceramic surface. The ceramic surface shuld be wiped with a damp clth that has been placed in warm water mixed with a small amunt f washing up liquid. Dry the appliance by rubbing the surface with a clean clth. Using a specialist ceramic hb cleaner It is pssible t purchase a specialist ceramic hb cleaner/cnditiner. Yu shuld fllw the instructins given by the manufacturer f the specialist ceramic hb cleaner. Yu shuld ensure that it is suitable fr use n yur appliance. Installatin The installatin must be carried ut by a suitably qualified persn, in accrdance with the current versin f the fllwing. UK Regulatins and Safety Standards r their Eurpean Nrm Replacements. Building Regulatins (issued by the Department f the Envirnment). Building Standards (issued by the Scttish Develpment Department). IEE Wiring Regulatins. Electricity At Wrk Regulatins. 18

19 Psitining The adjacent furniture must be able t withstand a minimum temperature rise f 85 C abve the ambient temperature f the rm it is lcated in, during perids f use. This appliance is classified as Class 3 and therefre is t be built int a kitchen unit (depending n size) r 600 mm wrktp that is at least 30 mm thick. The fllwing minimum clearance distances must be bserved:- 700 mm between the hb surface and the underside f any hrizntal surface abve it. 50 mm clearance arund the sides and frnt f the appliance. 55 mm clearance between the back f the hb surface and the wall behind it. If the hb is psitined s that the right r left hand side f the appliance will be near t the edge f a kitchen unit. There must be a gap f at least 150 mm between the side f the hb and the vertical surface f the kitchen unit. Unpacking the appliance When unpacking the appliance please check that the fllwing items are cntained within the packaging:- 1 Baumatic hb 1 Ceramic hb scraper 1 Installatin and instructin manual 1 Baumatic guarantee card 4 Fixing brackets 4 Fixing screws 1 Sealing strip 19

IMPORTANT: There are ventilatin hles arund the utside f the hb.

20 Installing the appliance Cut a hle in the wrktp that crrespnds with the drawing shwn abve. IMPORTANT: Yu must bserve the ventilatin requirements shwn in the drawing ppsite. IMPORTANT: There are ventilatin hles arund the utside f the hb. YOU MUST ensure that these hles are nt blcked by the wrk tp, when yu put the hb int psitin (see drawing ppsite). Carefully turn the hb upside dwn and place it n a cushined mat. 20

Apply the sealing strip prvided arund the edge f the appliance. The prtective cvering must be remved frm bth sides. D nt leave a gap in the sealing agent r verlap the thickness.

21 Apply the sealing strip prvided arund the edge f the appliance. The prtective cvering must be remved frm bth sides. D nt leave a gap in the sealing agent r verlap the thickness. IMPORTANT: D nt use a silicn sealant t seal the appliance against the aperture. This will make it difficult t remve the hb frm the aperture in future, particularly if it needs t be serviced. Carefully turn the hb back ver and then gently lwer it int the aperture hle that yu have cut ut. There are hles n the base r the sides f the hb that yu can fix the fur brackets t. There are three hles in each ne f the brackets. Yu shuld place the bracket n the underneath f the hb, in a psitin that is apprpriate fr the aperture that yu have cut ut. Using the screws prvided, fix the bracket t the hb. These screws MUST be securely tightened. 21

Electrical cnnectin This appliance must be installed by a qualified persn in accrdance with the latest editin f the I.E.E. Regulatins and in cmpliance with Baumatic s instructins.

22 Electrical cnnectin This appliance must be installed by a qualified persn in accrdance with the latest editin f the I.E.E. Regulatins and in cmpliance with Baumatic s instructins. Befre cnnecting the appliance, make sure that the supply vltage marked n the rating plate crrespnds with yur mains supply vltage. WARNING: THIS APPLIANCE MUST BE EARTHED. This appliance must be wired int a 30 A duble ple switched fused spur utlet, having 3 mm cntact separatin and placed in an easily accessible psitin adjacent t the appliance. It shuld nt be lcated abve the appliance and n mre than 1.25m away frm it. The spur utlet must still be accessible even when yur hb is lcated in its perating psitin. Cable type: H05 RRF 3 cre x 4 mm² Cnnecting the mains supply cable The mains terminal blck is lcated n the underside f the hb and the terminals are accessible by remving the terminal blck cver by remving the cver screw. 22

23 The cable cnnectins must be in accrdance with the diagram lcated n the bttm f the hb (see abve). Yu shuld use a gd quality screwdriver t carefully, fully tighten ALL f the terminal screws. If when the hb is first switched n, nly tw f the znes wrk, yu shuld recheck that the terminal screws are all fully tightened. This shuld be dne befre cntacting the Baumatic Service Department. IMPORTANT: The appliance must NOT be cnnected t the mains supply by means f a 13A plug and scket. The cable can be lped if necessary, but make sure that is nt kinked r trapped when the hb is in psitin. Care must be taken t avid the cable being in cntact with ht parts f the appliance. 23

24 Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an apprpriate replacement. The mains supply cable shuld be replaced in accrdance with the fllwing instructins: Switch the appliance ff at the cntrl switch. Open the terminal blck n the underside f the hb. Unscrew the terminal screws fixing the cable. Replace the cable with ne f the same length and in accrdance with the specificatin given n page 22. The green-yellw earth wire must be cnnected t the terminal marked. It must be abut 10 mm lnger than the live and neutral wires. The blue neutral wire must be cnnected t the terminal marked with letter (N) - the live wire must be cnnected t the terminal marked with letter (L). My appliance isn t wrking crrectly The cking znes are nt functining r will nt switch n. * It has been mre than 2 minutes since the appliance was switched n. Yu shuld switch the appliance back n again, using the ON/OFF buttn and then switch n a cking zne. * The safety lck has been switched n (see the Lcking the hb tp sectin fr infrmatin n hw t turn ff the safety lck). * Several cking zne selectin buttns have been pressed at nce. Yu shuld nly try t switch n ne cking zne at nce. * The safety cut ut has been triggered. Press the ON/OFF buttn t reset the hb. * Check that the mains electrical supply t the appliance is crrect and wrking. Check the mains fuse. 24

25 The residual heat indicatr has nt cme n after I have switched a cking zne ff. * The cking zne has nly been turned n fr a shrt perid f time; therefre it did nt g abve 60 C. * IMPORTANT: If the cking zne des appear t be htter than 60 C and the residual heat indicatr has nt cme n, yu shuld call the Baumatic Service Department. A humming sund is heard when a cking zne is selected. * This is nrmal; the sund will disappear when the zne heats up. The cking znes have becme disclured. * This maybe caused by burnt n remnants f fd. This will nt affect the wrking f the appliance. Hwever yu shuld make sure that the cleaning instructins are being fllwed regularly. IMPORTANT: If yur appliance appears nt t be perating crrectly, then yu shuld discnnect it frm yur mains supply and then cntact the Baumatic Service Department n telephne number (0118) DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please nte that if an engineer is asked t attend whilst the prduct is under guarantee and finds that the prblem is nt the result f an appliance fault, then yu may be liable fr the cst f the call ut charge. The appliance must be accessible fr the engineer t perfrm any necessary repair. If yur appliance is installed in such a way that an engineer is cncerned that damage will be caused t the appliance r yur kitchen, then he will nt cmplete a repair. This includes situatins where appliances have been tiled in, sealed in with sealant, have wden bstructins placed in frnt f the appliance, like plinths. Or any installatin ther than the ne specified by Baumatic Ltd. has been cmpleted. Please refer t the cnditins f guarantee that appear n the warranty card that yu receive with the appliance. 25

26 Czech Republic Baumatic CR spl s.r.. Amperva , Librec Czech Republic United Kingdm Baumatic Ltd., Baumatic Buildings, 6 Bennet Rad, Reading, Berkshire RG2 0QX United Kingdm Sales Telephne (0118) Sales Fax (0118) Service Telephne (0118) Service Fax (0118) Spares Telephne (01235) Baumatic Advice Line (0118) sales@baumatic.c.uk technical@baumatic.c.uk Website: Republic f Ireland Slvak Republic Baumatic Slvakia, s.r.. Skultetyh Bratislava 3 Slvakia Germany Baumatic Gmbh Janderstrasse 9 Mannheim, Germany Italy Baumatic Italia S.R.L. Via Caltana 129 Campdarseg (Padva), Italy Hlland Baumatic Benelux B.V. Grindzuigerstraat MS ALMERE The Netherlands

27 27

28 28

BHI770SS 77 cm Flexi Zone Induction hob with slider control

BHI770SS 77 cm Flexi Zone Induction hob with slider control BHI770SS 77 cm Flexi Zne Inductin hb with slider cntrl User Manual fr yur Baumatic BHI770SS 77 cm Flexi-Zne Inductin hb with slider NOTE: This User Instructin Manual cntains imprtant infrmatin, including