BAM253T K 25 Litre combination microwave oven with grill

Transcription

1 BAM253T K 25 Litre cmbinatin micrwave ven with grill User Manual fr yur Baumatic 1

2 Welcme t Think Appliances Thank yu fr selecting a quality prduct frm Think Appliances. We have taken the time t ensure that yur appliance is f the highest pssible standard and will give yu years f use in yur hme. Please take the time t call ur Custmer Care centre n ur free call number T register yur parts and labur warranty (sme cnditins apply please refer t yur warranty card fr mre details). Our Custmer Care centre is there t ensure yu get the mst ut f yur appliance. Fr example, shuld yu want t learn mre abut recmmended cking temperatures, the varius cking functins available, hw t set and prgram yur LED clck, and imprtantly taking care f yur appliance when cleaning, please call us because we are here t help yu. It is imprtant that yu read thrugh the fllwing use and care manual thrughly t familiarise yurself with the installatin and peratin requirements f yur appliance t ensure ptimum perfrmance. Shuld yu have any queries regarding this infrmatin, please dn t hesitate t cntact ur Custmer Care centre. We als carry a cmplete range f spare parts fr all Think prducts. Please cntact ur team at Prnt Parts n fr all yur spare parts requirements. Again, thank yu fr chsing an appliance brught t yu by Think Appliances and we lk frward t being f service t yu. Kind regards, Ruud Jna Managing Directr Think Appliances 2

3 BAM253TK 25 Litre cmbinatin micrwave ven with grill NOTE: This User Instructin Manual cntains imprtant infrmatin, including safety & installatin pints, which will enable yu t get the mst ut f yur appliance. Please keep it in a safe place s that it is easily available fr future reference; fr yu r any persn nt familiar with the peratin f the appliance. GS 06/09/10 3

4 Cntents Envirnmental nte 5 Imprtant safety infrmatin 5 10 Specificatins Prduct and aperture dimensins 11 Prduct specificatins Electrical details 12 Descriptin f the appliance 12 Cntrl panel 13 The turntable 13 LED display 14 Using yur micrwave The adjustment dial 15 Setting the clck 15 Befre first use 15 Micrwave cking secnd (Quick start) 17 Micrwave pwer level chart 17 Time setting chart 17 Grill cking 18 Cmbinatin cking 19 Cmbinatin cking chart 19 Cnvectin cking 20 Cnvectin cking (with autmatic pre-heating) Interrupting a cking cycle Cancelling a cking cycle 22 Enquiry mde 22 Defrst by weight 22 Defrst by time 23 Setting multiple cking phases 23 The kitchen timer 24 Aut menu functin Aut menu chart 25 Safety lck 26 Micrwave cking guidelines Materials yu can use in a micrwave ven Materials nt t be placed in a micrwave ven Utensils table Cleaning and maintenance The appliance exterir 29 The appliance interir 29 Turntable and turntable supprt 29 General cleaning advice Installatin Electrical cnnectin Aperture and ventilatin requirements 32 Built under installatin requirements 33 Supplied installatin cmpnents 33 Preparing the husing unit Installing the ven int a husing unit My appliance isn t wrking crrectly Cntact details 39 4

5 Envirnmental nte The packaging materials that Baumatic uses are envirnmentally friendly and can be recycled. Please discard all packaging material with due regard fr the envirnment. 5

6 IMPORTANT SAFETY INFORMATION Yur safety is f the utmst imprtance t Baumatic. Please make sure that yu read this instructin bklet befre attempting t install r use the appliance. If yu are unsure f any f the infrmatin cntained in this bklet, please cntact the Advice Line. General Infrmatin This appliance is designed fr dmestic husehld use. It can NOT be used as a freestanding micrwave and must be built in t a standard kitchen cabinet r husing unit (see the sectin entitled Installatin belw). Yu shuld nly perate the appliance when the turntable and turntable supprt are in psitin. Yu shuld nly use venware that is suitable fr being used in a micrwave. T prevent crrsin ccurring due t misture/cndensatin, the cavity and the dr f the micrwave shuld be wiped dry after each use f the appliance. The appliance must nt be left unattended if yu are heating r cking fd in cntainers that are made f paper, plastic r ther flammable materials. If left unattended, they culd pse a fire hazard. If yu ntice smke cming frm the appliance, yu shuld keep the dr f the micrwave clsed and then discnnect it frm yur mains supply. DO NOT use yur micrwave ven, if yu think it is nt perating crrectly. Installatin IMPORTANT: Only the built in/built under installatin sanctined by Baumatic and utlined in this manual shuld be fllwed. A separate building in kit will be supplied with the micrwave, t allw yu t cmplete a built in installatin. IMPORTANT: The adjacent furniture r husing and all materials used in the installatin must be able t withstand a minimum temperature f 85 C abve the ambient temperature f the rm it is lcated in, whilst in use. 6

7 Certain types f vinyl r laminate kitchen furniture are particularly prne t heat damage r discluratin at temperatures belw the guidelines given abve. Any damage caused by the appliance being installed in cntraventin f this temperature limit, r by placing adjacent cabinet materials clser than 4mm t the appliance, will be the liability f the wner. Fr use in leisure accmmdatin vehicles, please refer t the apprpriate infrmatin given in the installatin instructins fr this appliance. The use f this appliance fr any ther purpse r in any ther envirnment withut the express agreement f Baumatic Ltd. will invalidate any warranty r liability claim. Yur new appliance is guaranteed against electrical r mechanical defects, subject t certain exclusins that are nted in the Cnditins Of Guarantee. The freging des nt affect yur statutry rights. Service Yur micrwave cmplies with all relevant safety standards. In rder fr it t cntinue t perate safely, nly an engineer that is apprved by THINK appliances. IMPORTANT: It is dangerus fr a nn qualified persn t wrk n the appliance, in particular if they remve the cver that prvides prtectin against expsure t micrwave energy. If yu ntice that the dr seal, dr surfaces, pwer crd and plug are damaged. Yu shuld stp using the appliance, discnnect it frm the mains supply and cntact the Advice Line. Only genuine Baumatic spare parts shuld be fitted t yur appliance. These can be btained frm the THINK appliances. 7

8 Warning and safety instructins This appliance cmplies with all current Australian and Eurpean safety legislatin. Baumatic d wish t emphasise that this cmpliance des nt remve the fact that the appliance surfaces will becme ht during use and retain heat after peratin. DO NOT place anything between the dr and the dr frame. DO NOT stre anything that is flammable inside f the micrwave. When it is switched n, the items culd catch fire. DO NOT switch the appliance n if there is n fd r liquid inside f the micrwave. If yu run the micrwave whilst it is empty, there is a chance that it will verlad. The dr seals and the dr surfaces shuld ALWAYS be kept clean and free frm debris. Child Safety Baumatic strngly recmmend that babies and yung children are prevented frm being near t the appliance and nt allwed t tuch the appliance at any time. If it is necessary fr yunger family members t be in the kitchen, please ensure that they are kept under clse supervisin at all times. IMPORTANT: This appliance shuld nly be perated by adults. Yu SHOULD NOT allw yung children t use the micrwave withut supervisin. Older children shuld nly perate the appliance if they have been thrughly instructed n hw t use the micrwave and the cnsequences f imprper usage. General Safety D nt allw electrical fittings r cables t cme int cntact with areas n the appliance that get ht. D nt use the appliance t heat the rm it is lcated in. D nt use the appliance t dry paper, textiles r animals. D nt install the appliance next t curtains r sft furnishings. D nt use the appliance t heat unpened bttles r cans etc. 8

9 D nt heat cking il r liquid cntaining alchl, as there is the chance f spntaneus cmbustin. D nt bil eggs r similar fds in their shells, therwise they may burst. It is pssible t pach eggs in yur micrwave, prviding yu prick the ylks first. D nt attempt t lift r mve cking appliances by using the ven dr, as this may cause damage t the appliance r result in injury t the persn lifting the appliance. Cleaning Cleaning f the ven shuld be carried ut n a regular basis. Great care shuld be taken whilst using this appliance and when fllwing the cleaning prcedure. IMPORTANT: The appliance must be discnnected frm the mains befre fllwing the cleaning prcedure. Installatin This appliance must be crrectly installed by a suitably qualified persn, strictly in accrdance with the manufacturer s instructins. NOTE: Adequate ventilatin within the installatin cavity is essential t maintain temperatures within permissible levels. Any fault attributed t inadequate ventilatin may nt be cvered by warranty. Baumatic Ltd. declines any respnsibility fr injury r damage, t persn r prperty, as a result f imprper use r installatin f this appliance. Heat, steam and misture will be created during use f the appliance, take care t avid injury and ensure that the rm is adequately ventilated. If the appliance is ging t be used fr prlnged perids f time, then additinal ventilatin may be required. Please cnsult with yur qualified installer if yu are in any dubt abut the amunt f ventilatin that yu will require. 9

10 Declaratin f cnfrmity CE: Appliance cnfrming t the Eurpean directives 89/336/EEC, 93/68/EEC, 73/23/EEC and subsequent revisins and RHS directive 2002/95/CE.* The manufacturer declares that the ven is built using certified materials and requires the appliance t be installed in accrdance with the standards currently in frce. This appliance must be used by a trained persn fr dmestic purpses nly. * The RHS directive stands fr the restrictin f the use f certain hazardus substances in electrical and electrnic equipment. This directive bans the placing n the EU market f new electrical and electrnic equipment cntaining mre than the agreed levels f lead, cadmium, mercury, hexavalent chrmium, plybrminated biphenyl (PBB) and plybrminated diphenyl ether (PBDE) flame retardants. 10

11 Specificatins Prduct dimensins (including frame kit) Height: 460 mm Width: 594 mm Depth: 465 mm Aperture dimensins Height: 450 mm Width: 600 mm Depth: 550 mm Prduct specificatins 10 functins: Aut-reheat Vegetables Fish Meat Pasta Ptat Pizza Sup Chicken Cake Quick start LED full prgrammer Pushbuttn cntrl peratin Safety lck Stainless steel exterir and cavity 11

12 ~ Capacity: Micrwave utput: Grill utput: Ht air utput: Electrical details Rated Vltage: Supply Cnnectin: Max Rated Inputs: Mains Supply Lead: 25 litres 900 W W W Vac 50 Hz 10 A plug and crdset W 3 x 1.0 mm² Fr future reference please recrd the fllwing infrmatin which can be fund n the rating plate and the date f purchase which can be fund n yur sales invice. The rating plate fr yur ven can be lcated by pening the micrwave ven dr and lking n the right hand side f the chassis. Mdel Number Serial Number.. Date f Purchase. Descriptin f the appliance A) Cntrl panel B) Turntable shaft C) Turntable ring assembly D) Glass tray E) Viewing windw F) Dr G) Safety interlck system H) Grill rack 12

13 Cntrl panel I H G Micrwave Grill/Cmbi. W.T./Time Defrst Clck/ Kitchen Timer Cnvectin Stp/ Clear Start/+30Sec. /Cnfirm A B C D A) LED display B) Cnvectin buttn C) Stp/Clear buttn D) Start/+30 Secnd/Cnfirm buttn E) Adjustment dial F) Dr buttn G) Clck/Kitchen timer buttn H) Defrst by Weight/Time buttn I) Micrwave/Grill/ Cmbinatin buttn KG E F The turntable Hub (n the underside) Never place the glass tray upside dwn. Glass tray The glass tray and turntable ring assembly MUST always be used during cking. Turntable shaft Turntable ring assembly All fd and fd cntainers must ALWAYS be placed n the glass tray during cking. If the glass tray r turntable ring assembly cracks r breaks, it must be replaced immediately. Genuine Baumatic parts can be btained THINK appliances. 13

14 LED display The LED display will shw the time f day, r if the micrwave is in use, it will shw the cking time. Indicates that micrwave cking is taking place. Indicates that cnvectin cking is taking place. Indicates that grilling is taking place. Indicates that defrsting is taking place. Indicates that the safety lck is engaged. Indicates that the aut menu functin has been selected. Indicates that grams are shwn n the LED display. Indicates that the temperature (in centigrade) is shwn n the LED display. WARNING: The accessible surface may be ht during peratin and fr a perid f time afterwards. 14

15 Using yur micrwave The adjustment dial The adjustment dial (E) shuld nly be turned clckwise (twards the bk symbl) if yu want t use the aut menu functin. Fr all ther purpses and settings, the adjustment dial (E) shuld be turned anti-clckwise (twards the clck symbl). Setting the clck When yur appliance is cnnected t the pwer supply fr the first time, the LED display (A) will shw 0:00 and an audible signal will sund nce. Press the clck/kitchen timer buttn (G) t enter the clck setting mde. Use the adjustment dial (E) t adjust the hur time. Yu can adjust the hur time between 0 23 in 24 hur clck mde. Press the clck/kitchen timer buttn (G) t cnfirm the hur time. The minute digits will flash. Turn the adjustment dial (E) t adjust the minute time. Press the clck/kitchen timer buttn (G) t cnfirm the minute time. The : symbl will flash and the time f day will light n the LED display (A). If during the clck setting prcess the stp/clear buttn (C) is pressed, the micrwave will return t the previus step. Befre first use T remve any residue frm the ven that may have been left frm the manufacturing prcess, yu shuld place a cup that is half filled with water in the micrwave. Set the micrwave n its highest pwer level fr 2 minutes. The ven cavity and utside f the appliance shuld be cleaned with warm sapy water, using either a spnge r sft clth. N abrasive cleaners shuld be used. The appliance shuld be thrughly dried afterwards. 15

16 Micrwave cking Once the clck has been set, yur micrwave is then ready t use. Use the dr buttn (F) t pen the dr f the micrwave. Check that the turntable shaft, turntable ring assembly and glass tray are crrectly assembled in the cavity. Place whatever yu are cking in the centre f the micrwave cavity and then clse the micrwave dr. IMPORTANT: Yu shuld make sure that the dr f the micrwave is shut securely. Press the micrwave buttn (I) nce and the LED display (A) will shw P100, indicating that the appliance will ck at its highest pwer level. T adjust the pwer level, turn the adjustment dial (E) r keep pressing the micrwave buttn (I). P100, P80, P50, P30 r P10 will appear n the LED display Once the pwer level that yu require appears n the LED display (A), press the cnfirm buttn (D). Turn the adjustment dial (E) t set the cking time that yu require. The maximum cking time that yu can set is 95 minutes. Press the start buttn (D) and yur micrwave will start t heat. If yu have set the incrrect pwer level r time, press the stp/clear buttn (C) and the LED display (A) will return t shwing the time f day. At the end f the cking time, yur micrwave will give an audible signal and the LED display (A) will return t shwing the time f day. Use the dr buttn (F) t pen the dr f the micrwave. IMPORTANT: The inside f the micrwave and the fd that yu have been cking may be extremely ht. S care shuld be taken when remving items frm the micrwave. We wuld recmmend that yu use an ven glve. After the fd has been remved frm the micrwave, yu shuld make sure that the dr is clsed. 16

17 + 30 secnd buttn (Quick start) If yu want t ck n the highest pwer level setting fr a perid f time, then yu can use the +30 secnd buttn (D). Press the +30 secnd buttn (D) nce and yur micrwave will perate n full pwer fr 30 secnds. Each time yu press the +30 secnd buttn (D) the cking time will increase by 30 secnds. If a micrwave, grill r cmbinatin cking prgram is in prcess, pressing the +30 secnd buttn will extend the cking time by 30 secnds. IMPORANT: Yu cannt use the quick start feature in defrst and aut menu mdes r if yu have set multiple cking phases. Alternatively yu can just turn the adjustment dial (E) left and select the cking time, then press the start buttn (D). The micrwave will ck n the highest pwer level setting fr the perid f time that yu have set. Micrwave pwer level chart Pwer High Medium Medium Medium Lw high lw Display shws P100 P80 P50 P30 P10 Time setting chart When yu are setting a cking time, the clck will cunt in the fllwing time intervals. Time perid being set Time intervals 0 1 minute 5 secnds 1 5 minutes 10 secnds 5 10 minutes 30 secnds minutes 1 minute minutes 5 minutes 17

18 Grill cking Press the grill buttn (I) nce and the LED display (A) will shw P100. Turn the adjustment dial (E) r keep pressing the grill buttn (I) until G-1 appears n the LED display. Once G-1 appears n the LED display (A), press the cnfirm buttn (D). Turn the adjustment dial (E) t set the cking time that yu require. The maximum cking time that yu can set is 95 minutes. Press the start buttn (D) and yur micrwave will start t grill. If yu have set the incrrect pwer level r time, press the stp/clear buttn (C) and the LED display (A) will return t shwing the time f day. Halfway thrugh the cking time, an audible signal will sund. T achieve even grilling results, yu shuld pen the dr f the micrwave and turn the fd ver. After clsing the dr, yu shuld press the start buttn (D) and the micrwave will cntinue t grill. At the end f the cking time, yur micrwave will give an audible signal and the LED display (A) will return t shwing the time f day. Use the dr buttn (F) t pen the dr f the micrwave. IMPORTANT: The inside f the micrwave and the fd that yu have been cking may be extremely ht. S care shuld be taken when remving items frm the micrwave. We wuld recmmend that yu use an ven glve. After the fd has been remved frm the micrwave, yu shuld make sure that the dr is clsed. 18

19 Cmbinatin cking Press the cmbinatin buttn (I) nce and the LED display (A) will shw P100. Turn the adjustment dial (E) r keep pressing the cmbinatin buttn (I) until C-1, C-2, C-3 r C-4 appears n the LED display (see the table belw t see the varius cmbinatin cking mdes that can be selected). Once the cmbinatin mde that yu require appears n the LED display (A), press the cnfirm buttn (D). Turn the adjustment dial (E) t set the cking time that yu require. The maximum cking time that yu can set is 95 minutes. Press the start buttn (D) and yur micrwave will start t ck. If yu have set the incrrect cmbinatin mde r time, press the stp/clear buttn (C) and the LED display (A) will return t shwing the time f day. Cmbinatin cking chart The chart belw shws the cmbinatin cking mdes that can be selected. LED display Micrwave Grill Cnvectin C-1 C-2 C-3 C-4 19

20 Cnvectin cking Cnvectin cking allws yu t perate yur micrwave like a traditinal ven. The appliance des nt use micrwaves t ck the fd and the cavity shuld be preheated befre fd is placed inside f it. Use the dr buttn (F) t pen the dr f the micrwave. Place whatever yu are cking in the centre f the micrwave cavity and then clse the micrwave dr. IMPORTANT: Yu shuld make sure that the dr f the micrwave is shut securely. Press the cnvectin buttn (B) nce and the LED display will shw 140. Turn the adjustment dial (E) r keep pressing the cnvectin buttn t set the temperature. The cking temperature can be adjusted between 140 C and 230 C. Once the temperature that yu require appears n the LED display (A), press the cnfirm buttn (D). Turn the adjustment dial (E) t set the cking time that yu require. The maximum cking time that yu can set is 95 minutes. Press the start buttn (D) and yur micrwave will start t ck. If yu have set the incrrect cking time r temperature, press the stp/clear buttn (C) and the LED display (A) will return t shwing the time f day. Cnvectin cking (with autmatic pre-heating) The dr f the micrwave shuld be shut befre the steps belw are fllwed. Press the cnvectin buttn (B) nce and the LED display will shw 140. Turn the adjustment dial (E) r keep pressing the cnvectin buttn t set the temperature. The cking temperature can be adjusted between 140 C and 230 C. Once the temperature that yu require appears n the LED display (A), press the cnfirm buttn (D). 20

21 Press the start buttn (D) and the micrwave will start t preheat the ven cavity t the temperature that yu have selected. Once the required temperature inside the ven cavity has been reached, an audible signal will sund twice and the LED display will flash. IMPORTANT: If after 30 minutes the pre-heating temperature has nt been reached, the audible signal will sund twice. At this pint yu shuld input the cking time that yu require. Yu cannt set the cking time until pre-heating has finished. If a cking time is nt set within 5 minutes after pre-heating is cmplete, the ven will stp heating and an audible signal will sund five times. Use the dr buttn (F) t pen the dr f the micrwave. Place whatever yu are cking in the centre f the micrwave cavity and then clse the micrwave dr. IMPORTANT: Yu shuld make sure that the dr f the micrwave is shut securely. Yu cannt set the cking time until the dr f the micrwave has been pened and clsed again. Turn the adjustment dial (E) t set the cking time that yu require. The maximum cking time that yu can set is 95 minutes. Press the start buttn (D) and yur micrwave will start t ck. If yu have set the incrrect cking time r temperature, press the stp/clear buttn (C) and the LED display (A) will return t shwing the time f day. Interrupting a cking cycle If yu wish t temprarily interrupt a cking cycle when it is in prgress (fr example t stir what yu are heating), yu shuld press the dr buttn (F). The dr f the micrwave will pen and it will stp heating immediately. T restart the cking cycle, clse the micrwave dr and then press the start buttn (D). 21

22 Cancelling a cking cycle If yu wish t cancel a cking cycle when it is in prgress, yu shuld press the stp/clear buttn (C). The micrwave will stp heating immediately, give an audible signal and the LED display (A) will return t shwing the time f day. Use the dr buttn (F) t pen the dr f the micrwave. IMPORTANT: The inside f the micrwave and the fd that yu have been cking may be extremely ht. S care shuld be taken when remving items frm the micrwave. After the fd has been remved frm the micrwave, yu shuld make sure that the dr is clsed. Enquiry mde Whilst the micrwave is in use, the LED display (A) will cuntdwn the cking time that yu have set. T check the pwer level that the micrwave is cking at, press the micrwave/grill/cmbi buttn (I) and the pwer level will appear n the LED display (A) fr a few secnds. T check the time f day, press the clck/kitchen timer buttn (G) and the time f day will flash n the LED display (A) fr a few secnds. Defrst by weight Press the defrst by weight/time buttn (H) nce and the LED display (A) will shw d-1. Turn the adjustment dial (E) t select the weight f the fd that yu want t defrst. The letter g will appear n the LED display (A) t indicate grams. The micrwave will autmatically calculate the defrst time, based n the weight that yu have selected. Press the start buttn (D) and yur micrwave will start t defrst the fd. 22

23 Defrst by time Press the defrst by weight/time buttn (H) twice and the LED display (A) will shw d-2. Turn the adjustment dial (E) t set the defrst time that yu require. Press the start buttn (D) and yur micrwave will start t defrst the fd. Setting multiple cking phases It is pssible t set the micrwave t ck at different pwer levels within a single cking time. A maximum number f 2 cking phases can be set at nce. Press the micrwave/grill/cmbi buttn (I) and set the pwer level/cking mde fr the first cking phase, using the adjustment dial (E). Once the pwer level/cking mde that yu require fr the first phase appears n the LED display (A), press the the start buttn (D) again. Turn the adjustment dial (E) t set the cking time fr the first cking phase. Press the micrwave/grill/cmbi buttn (I) and then fllw the same prcedure fr the secnd cking phase (if required). Press the start buttn (D) and the micrwave will prceed with the cking phases that yu have set. If yu have set the incrrect pwer level r time, press the stp/clear buttn (C) and the LED display (A) will return t shwing the time f day. At the end f the cking time, yur micrwave will give an audible signal and the LED display (A) will return t shwing the time f day. 23

24 The kitchen timer The kitchen timer will cuntdwn a set time and a buzzer will sund when the required time is reached. The kitchen timer is t be used separately frm the micrwave functins and cannt be used at the same time. IMPORTANT: Yu must make sure that the clck is set t the crrect time befre using this feature. Press the clck/kitchen timer buttn (G) twice and the LED display will shw 00:00. Use the adjustment dial (E) t set the desired cuntdwn time. The maximum prgrammable time is 95 minutes. Press the start/cnfirm buttn (D) t set the displayed time. During the cuntdwn, the LED display will shw the remaining time. When the cuntdwn is cmplete, a buzzer will sund five times. Aut menu functin Yur micrwave has menus pre-prgrammed int it, where it will ck particular types f fd n pre-set pwer levels and fr preset perids f time. Turn the adjustment dial (E) clckwise t access the aut menu functin, the LED display (A) will shw A-1. Turn the adjustment dial (E) clckwise t select the fd type that yu want t ck. Press the cnfirm buttn (D) t cnfirm the fd type. Turn the adjustment dial (E) clckwise t select the weight f the fd that yu want t ck. The letter g will appear n the LED display (A) t indicate grams. Press the start buttn (D) and yur micrwave will start t heat. The gram symbl will g ut and the cking time will start cunting dwn n the LED display (A). The cake menu ptin utilises cnvectin cking and includes a preheat phase f 180 C. When the ven reaches the 180 C, the audible signal will sund. 24

25 The ven will stp heating, s yu can pen the micrwave dr t place the cake inside f the cavity. Shut the ven dr and then press the start buttn (D) t begin cking. Aut menu chart Menu A1 Reheat A2 Ptat A3 Meat A4 Vegetable A5 Fish A6 Pasta A7 Sup A8 Cake A9 Pizza A10 Chicken Weight Display Pwer (g) % (abut 230g) 1 2 (abut 460g) 2 100% 3 (abut 690g) % % % (with water 450ml) (with water 800ml) % 150 (with water 1200ml) % Preheat at 180 C C-4 C-4 25

26 Safety lck When the micrwave is nt heating, it is pssible t switch n the safety lck. Press and hld dwn the stp/clear buttn (C) fr 3 secnds. The micrwave will emit a lng audible signal and the LED display (A) will display a padlck symbl. Until the safety lck is switched ff, all buttns n the micrwave will be disabled. T switch ff the safety lck, press and hld dwn the stp/clear buttn (C) fr 3 secnds. The micrwave will emit a lng audible signal and the padlck symbl will disappear frm the LED display (A). Micrwave cking guidelines If yu are heating liquid in the micrwave, then yu must als place a teaspn in the cntainer. This will ensure that the liquid des nt bil suddenly after being remved frm the micrwave cavity. This phenmenn is called delayed biling, this means that a liquid can be clse t biling pint, even if there is n steam cming ff the liquid r the liquid is nt bubbling. If the liquid cntainer is even gently shaken, then the liquid can withut warning bil ver r even spurt. This culd scald the end user. If the fd yu are cking has a skin r peel (e.g. sausages, tmates, ptates etc), then yu shuld pierce the skin r peel with a frk. This will ensure that if steam is created during the heating prcess, it can escape and the fd will nt burst. When heating baby fd, the bttle r jar cntaining the fd shuld NEVER have a tp r lid n. After cking, t ensure that the fd has been heated unifrmly, yu shuld stir r shake the fd. IMPORTANT: Yu must check the temperature f the fd befre feeding it t a child. When heating fd in a micrwave, it will transmit the heat t the cntainer that the fd is in r n. Yu shuld ALWAYS use ven glves when remving items frm the micrwave. Yu shuld make sure that yu d nt ck fd fr t lng r at t high a pwer level. This culd cause certain areas f the fd t dry ut r even ignite. 26

27 Yu shuld nt use ceramic r prcelain crckery, r prus earthenware inside f yur micrwave. These dishes culd absrb misture frm the fd whilst it is cking, which culd cause pressure t build up and shatter the dish. If yu are heating certain fds and any liquid, misture will evaprate and cndensatin may ccur. This des nt indicate that the appliance is faulty and it can be particularly nticeable if the ambient temperature f the rm is high. IMPORTANT: Any cndensatin shuld be wiped up with a sft clth as sn as yu have finished using the micrwave. After the cking time has cmpleted, yu shuld let the fd stand fr a few minutes. This is called standing time and will allw the heat generated by the micrwave t spread evenly thrughut the fd. Materials yu can use fr micrwave cking Material Remarks Aluminium fil T be used fr shielding nly. Small smth pieces can be used t cver thin parts f meat r pultry t prevent vercking. Arcing can ccur if fil is t clse t the cavity walls. The fil shuld be at least 2.5 cm away frm the cavity walls. Brwning dish Fllw the manufacturer s instructins. The bttm f the brwning dish must be at least 5 mm thick abve the turntable. Incrrect usage may cause the turntable t break. Dinnerware Micrwave-safe nly. Fllw the manufacturer s instructins. D nt use cracked r chipped dishes. Glass jars Always remve the lid. Use nly t heat fd until just warm. Mst glass jars are nt heat resistant and may break. Glassware Heat-resistant ven glassware nly. Make sure there is n metallic trim. D nt use cracked r chipped dishes. Oven cking bags Fllw the manufacturer s instructins. D nt clse with a metal tie. Make slits in the bag t allw steam t escape. Paper plates and cups Use fr shrt-term cking/warming nly. D nt leave the ven unattended whilst cking. Paper twels Use t cver fd fr reheating and absrbing fat. Use under supervisin and fr shrt-term cking nly. Parchment paper Use as a cver t prevent splattering r as a wrap fr steaming 27

28 Plastic Micrwave-safe nly. Fllw the manufacturer s instructins. It shuld be labelled as micrwave safe. Sme plastic cntainers sften as the fd inside gets ht. Biling bags and tightly clsed plastic bags shuld be slit, pierced r vented, as described by the package. Plastic wrap Micrwave-safe nly. Use t cver fd during cking t retain misture. D nt allw the plastic wrap t tuch the fd. Thermmeters Micrwave-safe nly. Meat and candy thermmeters. Wax paper Use as a cver t prevent splattering and t retain misture. Materials yu cannt use fr micrwave cking Material Remarks Aluminium tray May cause arcing. Transfer fd int a micrwave-safe dish. Fd cartn with May cause arcing. Transfer fd int a metal handle micrwave-safe dish. Metal r metaltrimmed Metal shields the fd frm micrwave energy. utensils The metal trim may cause arcing. Metal twist ties May cause arcing and culd cause a fire in the ven. Paper bags May cause a fire in the ven. Plastic fam Plastic fam may melt r cntaminate the liquid inside when expsed t a high temperature. Wd Wd will dry ut when used in the micrwave ven and may split r crack. Utensils table Ckware Micrwave Grill Cmbinatin* Heat-resistant glass Yes Yes Yes Nn heatresistant N N N glass Heat-resistant Yes Yes Yes ceramics Micrwave-safe Yes N N plastic dish Kitchen paper Yes N N Metal tray N Yes N Metal rack N Yes N Aluminium fil N Yes N and fil cntainers 28

29 * Cmbinatin mde applies t micrwave + grill and micrwave + cnvectin mdes. Cleaning and maintenance The appliance exterir Cleaning peratins must nly be carried ut when the ven is cl. The appliance shuld be discnnected frm yur mains supply befre cmmencing any cleaning prcess. Yu shuld wipe ver the frnt f the appliance with a sft clth and warm water mixed with a little washing up liquid. DO NOT use abrasive cleaners r sharp bjects t clean the frnt surface f the micrwave. The appliance interir Yu shuld wipe ver the inside f the appliance with a sft clth and warm water mixed with a little washing up liquid. Yu shuld pay particular attentin t the dr seal and the surrunding area. DO NOT use abrasive cleaners r sharp bjects t clean the inside f the micrwave. Turntable and turntable supprt The glass tray and turntable ring assembly shuld be remved frm the micrwave fr cleaning purpses after each use. Clean the glass tray and turntable ring assembly in warm water mixed with a little washing up liquid. General cleaning advice IMPORTANT: Any cndensatin shuld be wiped up with a sft clth as sn as yu have finished using the micrwave. T remve durs frm inside f the micrwave, yu shuld bil ne cup f water mixed with several tablespns f lemn juice inside f the cavity. 29

30 The micrwave shuld be thrughly cleaned befre it is perated fr the first time and after each use. This will avid residual fd stuffs becming baked n the ven cavity. After residues have been baked n several times, they are far mre difficult t remve. Never clean the ven surfaces by steam cleaning. If yu use any frm f ven cleaner n yur appliance, then yu must check with the manufacturer f the cleaner that it is suitable fr use n yur appliance. Any damage that is caused t the appliance by a cleaning prduct will nt be fixed by Baumatic free f charge, even if the appliance is within the guarantee perid. Installatin The installatin must be carried ut by a suitably qualified persn, in accrdance with all current Australian and lcal regulatins. Electrical cnnectin YOUR MICROWAVE IS INTENDED FOR FITTED AND PERMANENT INSTALLATION. Befre cnnecting the appliance, make sure that the supply vltage marked n the rating plate crrespnds with yur mains supply vltage. We recmmend that the appliance is cnnected by a qualified electrician. WARNING: THIS APPLIANCE MUST BE EARTHED. 30

31 This appliance is supplied with a mulded 10A plug, which must be cnnected t an earthed scket. The earthed scket shuld be easily accessible after installatin. The wiring in the mains lead is clured as fllws: Brwn Blue Green and yellw Live Neutral Earth As the clurs f the wires in the appliance s mains lead may nt crrespnd with the clured markings identifying the terminals in yur spur bx, please prceed as fllws: The brwn wire must be cnnected t the terminal marked L (live), r clured red. The blue wire must be cnnected t the terminal marked N (neutral), r clured black. The green and yellw wire must be cnnected t the terminal marked E (earth), r by the earth symbl, r clured green and yellw. When the cnnectin is cmpleted, n stray strands r cut wire shuld be present. The crd clamp must be secured ver the uter sheath. Brken r damaged pwer leads must nly be replaced by a suitably qualified persn. A pwer lead f a similar type must be used in replacement. Befre beginning t install yur appliance, check that there is n sign f damage (n the inside r the utside f the micrwave), and that there are n packing materials r accessries inside the cavity. Remve any prtective film n the micrwave. 31

32 Aperture and ventilatin requirements The diagram abve shws the aperture and ventilatin requirements that yu require t build the appliance int a husing unit. Ensure that the rear panel f the furniture husing unit has been remved. This ven may be installed withut any additinal ventilatin cut uts being made in the husing unit. Hwever the ventilatin cut shwn in the diagram MUST be present, therwise the micrwave ven may nt functin crrectly. D nt cver the ventilatin slts r air intake pints. 32

33 Built under installatin requirements IMPORTANT: NO OTHER METHODS OF BUILDING UNDER THE MICROWAVE ARE SANCTIONED BY BAUMATIC. The rear wall f the husing unit MUST be remved t allw there t be the crrect amunt f ventilatin. The minimum installatin height is 850 mm t allw sufficient ventilatin. An inductin hb MUST NOT be fitted abve the micrwave. WARNING: The micrwave will get ht during peratin; care shuld be taken nt t accidentally cme int cntact with the uter surface. WARNING: Children shuld nt be allwed near t the appliance unsupervised. Supplied installatin cmpnents 33

34 Preparing the husing unit 1 Yur appliance will be supplied with an installatin template, which yu shuld fllw when preparing the husing unit. Place the template n the base f the husing unit and tape it int psitin. IMPORTANT: The edge f template must be cmpletely level with the frnt edge f the husing unit. IMPORTANT: The centre line n the template MUST be psitined in the middle f the husing unit. Yu shuld make marks n the base f the husing unit, in the psitins marked with the letter a n the template. Fr the next step in the preparing the husing unit prcess, yu will require 10 x screw A and the bttm brackets. 34

35 Remve the template frm the base f the husing unit. Fix the bttm brackets t the base f the husing unit, using screw A. IMPORTANT: These screws must be fully tightened. Installing the ven int a husing unit Fit adjustment screw B int the adjustment screw-hle n the tp f the micrwave. Adjustment screw B shuld nt be fully tightened at this stage. 35

36 Place the micrwave int the husing unit. IMPORTANT: D nt push the micrwave fully int the husing unit, as yu still need t be able t access adjustment screw B at this stage f the installatin. IMPORTANT: Make sure that the ven feet are sitting crrectly in the grves n the bttm brackets. Turn adjustment screw B, ensuring that there is a 1 mm gap between adjustment screw B and the underneath f the tp surface f the husing unit. Push the micrwave fully int the husing unit. IMPORTANT: Care shuld be taken t ensure that yu d nt trap r kink the pwer crd. Open the micrwave dr and lcate screw-hle C. Use screw C t fix the micrwave ven t the husing unit. 36

37 Trubleshting The micrwave will nt switch n. * Check that the appliance has been cnnected t the mains supply crrectly. * Check that the fuse in the mulded plug has nt blwn. * If fuses blw n a regular basis, then we wuld recmmend that yu cnsult with a qualified electrician. * Check that there has nt been a pwer cut. The micrwave will nt start cking. * Check that the dr is prperly shut. * Check that the dr seal and surrunding area are clean. * Check that yu have pressed Quick Start/Start buttn. The turntable is nt turning. * Check that the turntable shaft is cnnected t the drive mtr crrectly. * Check that the venware is nt larger than the turntable glass. * Check that the fd yu are cking des nt extend beynd the turntable glass. Check that there is nthing underneath the turntable that is preventing it frm turning. The micrwave des nt switch ff. * Islate the micrwave frm yur mains supply and then cntact the Advice Line. * The interir light bulb is nt wrking. Call the Advice Line. The interir light bulb can nly be replaced by a trained service technician. My fd is nt cking prperly * Check that the pwer level and cking time that yu have set, is apprpriate fr the fd that yu are cking. * If yu are cking a duble amunt f fd, then yu will nrmally need t almst duble the cking time. * If the fd that yu have placed in the cavity is clder than nrmal, then the pwer level and cking time may need t be increased. 37

38 I am getting cndensatin in my ven * Steam and cndensatin are a natural by prduct f cking in a micrwave. * D nt leave fd in the ven t cl after it has been cked and the ven has been switched ff. * Use a cvered cntainer, where practical, when cking t reduce the amunt f cndensatin that frms. * Yu shuld wipe ver any cndensatin that has frmed, as sn as the fd has stpped cking. IMPORTANT: If yur appliance appears nt t be perating crrectly, then yu shuld discnnect it frm yur mains supply and then cntact the Advice Line n telephne number DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please return the appliance t yur nearest service lcatin as advised by Think shuld service be required. The warranty cverage des nt include call-ut. Please nte that if an engineer is asked t attend whilst the prduct is under guarantee and finds that the prblem is nt the result f an appliance fault, then yu may be liable fr the cst f the call ut charge. The appliance must be accessible fr the engineer t perfrm any necessary repair. If yur appliance is installed in such a way that an engineer is cncerned that damage will be caused t the appliance r yur kitchen, then he will nt cmplete a repair. This includes situatins where appliances have been tiled in, sealed in with sealant, have wden bstructins placed in frnt f the appliance, like plinths. Or any installatin ther than the ne specified by Baumatic Ltd. has been cmpleted. Please refer t the cnditins f guarantee that appear n the warranty card that yu receive with the appliance. IMPORTANT: Baumatic Ltd. perates a plicy f cntinuus imprvement and reserves the right t adjust and mdify its prducts withut prir ntificatin. 38

39 CONDITIONS OF GUARANTEE Dear Custmer, The cnditins f guarantee which apply t yur appliance are as fllws: Think Appliances will repair any defect that arises due t faulty manufacturing r wrkmanship free f charge during the warranty perid. Please refer t the warranty card fr details. This guarantee is in additin t and des nt diminish yur statutry r legal rights. If yu have any further questins please cntact Think Appliances Pty Ltd: SERVICE DEPARTMENT Phne: Fax: service@thinkappliances.cm SALES DEPARTMENT Phne: Fax: Web: 39

40 40