BCG605SS 60 cm Single cavity gas cooker with wok burner

Transcription

1 BCG605SS 60 cm Single cavity gas cker with wk burner y 1

2 User Manual fr yur Baumatic BCG605SS 60 cm Single cavity gas cker with wk burner NOTE: This User Instructin Manual cntains imprtant infrmatin, including safety & installatin pints, which will enable yu t get the mst ut f yur appliance. Please keep it in a safe place s that it is easily available fr future reference; fr yu r any persn nt familiar with the peratin f the appliance. JW 23/05/13 2

3 Cntents Envirnmental nte 4 Imprtant safety infrmatin 5 8 Specificatins 9 12 Dimensins 9 Specificatins 9 Standard accessries 10 Electrical details 10 Gas details 10 Prduct features 10 Cntrl panel Oven timer 12 Setting and using the ven timer 13 Setting the time f day 13 Setting the minute minder functin 13 Using the ven Befre first use Using the main ven Base burner appliances Using the grill 16 Cking guidelines 17 Warnings 17 Using the hb tp Befre first use 18 Using the hb tp znes Hb guidelines 19 Cleaning and Maintenance Cleaning the gas hb tp 20 After each use 20 Cleaning the burners 21 Cleaning the ven 21 Replacing the ven bulb 22 Remving the ven dr fr cleaning Installatin Psitining Ventilatin requirements 25 Safety chain anchrs 26 Securing the safety chains 27 Electrical cnnectin Gas cnnectin 29 Gas safety 30 Gas cnnectin Gas adjustment (cnversin t LPG fr the hb tp) 32 Minimum flw adjustment fr hb gas taps 33 Gas adjustment (cnversin t LPG fr the ven and grill) Minimum flw adjustment fr the ven and grill burners My appliance isn t wrking crrectly Baumatic cnsumables 40 Cntact details 41 3

4 Envirnmental nte The packaging materials that Baumatic uses are envirnmentally friendly and can be recycled. Please discard all packaging material with due regard fr the envirnment. 4

5 Imprtant safety infrmatin Yur safety is f the utmst imprtance t Baumatic. Please make sure that yu read this instructin bklet befre attempting t install r use the appliance. If yu are unsure f any f the infrmatin cntained in this bklet, please cntact the Baumatic Advice Line. General Infrmatin This appliance is designed fr dmestic husehld use and fr the cking f dmestic fdstuffs. IMPORTANT: The adjacent furniture and all materials used in the installatin must be able t withstand a minimum temperature f 85 C abve the ambient temperature f the rm it is lcated in, whilst in use. Certain types f vinyl r laminate kitchen furniture are particularly prne t heat damage r discluratin at temperatures belw the guidelines given abve. IMPORTANT: Baumatic Ltd. DO NOT recmmend that this appliance is installed n any type f marine vessel. The use f this appliance fr any ther purpse r in any ther envirnment withut the express agreement f Baumatic Ltd. will invalidate any warranty r liability claim. Yur new appliance is guaranteed against electrical r mechanical defects, subject t certain exclusins that are nted in Baumatic s Cnditins Of Guarantee. The freging des nt affect yur statutry rights. Repairs may nly be carried ut by Baumatic service engineers r their authrised service agents. Warning and safety instructins This appliance cmplies with all current Eurpean safety legislatin. Baumatic d wish t emphasise that this cmpliance des nt remve the fact that the appliance surfaces will becme ht during use and retain heat after peratin. 5

6 This appliance is nt intended fr use by persns (including children) with reduced physical, sensry r mental capabilities, r lack f experience and knwledge, unless they have been given supervisin r instructin cncerning use f the appliance by a persn respnsible fr their safety. Child Safety Baumatic strngly recmmend that babies and yung children are prevented frm being near t the appliance and nt allwed t tuch the appliance at any time. During and after use, all surfaces will becme ht. If it is necessary fr yunger family members t be in the kitchen, please ensure that they are kept under clse supervisin at all times. General Safety Make sure that yu understand the cntrls befre using the appliance. Check that all f the cntrls n the appliance are turned ff after use. Always stand back when pening the ven dr, this will allw heat t disperse. Take care when remving items frm the ven, as the cntents may be ht. Always keep the ven drs clsed when the ven is nt in use. Always fllw the basic principles f fd handling and hygiene; this will prevent the pssibility f bacterial grwth. Always keep ventilatin slts clear f bstructins. Keep fingers away frm the hinge areas when clsing the dr, therwise yu may trap them. Oven glves shuld be used when placing fd in the ven cavity and when remving it. Care shuld be taken t avid direct cntact with any f the elements in the appliance. DO NOT LEAVE THE APPLIANCE UNATTENDED WHILST IN USE. 6

7 D nt place heavy bjects n the ven dr r lean n the ven dr when it is pen, as this can cause damage t the ven dr hinges. Nbdy shuld be allwed t sit r stand n any part f the cker. D nt stre chemicals, fd stuffs, pressurised cntainers in r n the cker r in cabinets immediately abve r next t the cker. D nt heat up unpened fd cntainers, as pressure can build up which may cause the cntainer t burst. D nt place flammable r plastic items n r near the hb burners, these types f materials shuld als nt be placed in the ven r the cmpartment belw the ven. D nt leave heated il r fat unattended, as this is a fire risk. Yu shuld nt fill a deep fat frying pan mre than ne third full f fat r il; yu shuld als nt use a lid. D nt allw fat r il t build up in the ven trays, grill pan r ven base. D nt place pans r baking trays directly n the base f the ven cavity, r line it with aluminium fil. D nt grill fd cntaining fat withut using a grill trivet. The grill trivet shuld never be cvered with aluminium fil. D nt place ht parts in water, leave them t cl first. D nt allw vinegar, cffee, milk, saltwater, lemn, tmat juice r any liquid with high sugar cntent t remain in cntact with the enamel parts f the appliance. Spillages shuld be wiped up immediately. D nt allw electrical fittings r cables t cme int cntact with areas n the appliance that get ht. D nt use the appliance t heat the rm it is lcated in r t dry clthing. N clthing shuld be placed ver r near t the hb burners r ven dr. D nt install the appliance next t curtains r sft furnishings. D nt attempt t lift r mve cking appliances by using the ven dr r handle, as this may cause damage t the appliance r result in injury t the persn lifting the appliance. 7

8 Cleaning Cleaning f the ven shuld be carried ut n a regular basis. Great care shuld be taken whilst using this appliance and when fllwing the cleaning prcedure. IMPORTANT: The appliance must be discnnected frm the mains befre fllwing the cleaning prcedure. IMPORTANT: Care must be taken when cleaning between the dr glasses, and inside the inner frame as sme f the edges maybe sharp due t the manufacturing prcess. Installatin This appliance must be crrectly installed by a suitably qualified persn, strictly in accrdance with the manufacturer s instructins. Please see the specific sectin f this bklet that refers t installatin. Baumatic Ltd. declines any respnsibility fr injury r damage, t persn r prperty, as a result f imprper use r installatin f this appliance. Heat, steam and misture will be created during use f the appliance, take care t avid injury and ensure that the rm is adequately ventilated. If the appliance is ging t be used fr prlnged perids f time, then additinal ventilatin may be required. Please cnsult with yur qualified installer if yu are in any dubt abut the amunt f ventilatin that yu will require. Declaratin f cnfrmity This appliance cmplies with the fllwing Eurpean Directives: -73/23/EEC regarding lw vltage -89/336/EEC regarding electrmagnetic disturbances -89/109/EEC regarding materials in cntact with fd. The abve directives cmply with 93/68/EEC regarding CE marking. The manufacturer declares that the ven is built using certified materials and requires the appliance t be installed in accrdance with the standards currently in frce. This appliance must be used by a trained persn fr dmestic purpses nly. 8

9 Specificatins Prduct dimensins: Height: Width: Depth: mm 600 mm 600 mm Prduct specificatins: 4 zne gas hb: 1 x 3.30 kw wk burner 2 x 1.75 kw semi-rapid burner 1 x 1.00 kw auxiliary burner Enamelled pan stands Push buttn ignitin Flame failure safety device n every burner 2 functin ven Oven grss / net capacity: 65 / 58 litres LED minute minder Mechanically cntrlled thermstat Duble-glazed remvable dr Adjustable feet Flame failure safety device n ven and grill 9

10 Standard accessries 1 x Enamelled baking tray with handle 1 x Shelf 1 x Trivet LPG cnversin jets Electrical details Rated Vltage: Supply Cnnectin: Max Rated Inputs: Mains Supply Lead: Oven Light Bulb: Vac 50 Hz 3A (duble ple switched fused utlet with 3mm cntact gap) kw 3 cre x 2 mm² (nt supplied) E14 15 W/300 C screw type pygmy Gas details Gas Cnnectin Type: Gas Type (Natural Gas): 1/2 BSP 20 mbar Prduct features 1) Oven dr 2) Dr handle 3) Baking pan 4) Cntrl dials 5) Ignitin buttn 6) Cntrl panel 7) Cker tp 8) Cking zne 9) Enamelled pan stands 10

11 Fr future reference please recrd the fllwing infrmatin which can be fund n the rating plate and the date f purchase which can be fund n yur sales invice. The rating plate fr yur ven can be lcated n the frnt frame f the ven cavity. Mdel Number Serial Number.. Date f Purchase. Cntrl Panel Thermstat cntrl knb (grill and ven) Use this cntrl knb t set and cntrl the temperature fr the ven and grill. 11

12 Thermstat cntrl knb (hb) Use the cntrl knb f the relevant cking zne t set the temperature intensity. Oven timer 1) Alarm stp icn (press minus buttn t stp alarm). 2) Timer minus buttn. 3) Timer plus buttn. 4) Time-setting mde indicatr (press plus and minus buttns tgether t enter this mde). 12

13 Setting and using the ven timer Setting the time f day Befre using the ven fr the first time yu shuld set the time f day. Press the plus (3) and minus (2) buttns simultaneusly t enter the time-setting mde. The display will autmatically shw Use the plus (3) and minus (2) buttns t adjust the time t the crrect hur. Release all buttns and after a few secnds the time will be set. Setting the minute minder functin Yu are able t set the minute minder at any time, regardless f whether an ven functin has been selected. Yu can set a perid f time using the minute minder functin and an alarm will sund when this perid f time has elapsed. Press the plus buttn (3) t enter the alarm setting mde. Set the perid f time that yu wish the minute minder t cuntdwn fr by using the minus (2) and plus (3) buttns. Once the display has gt t yur desired cuntdwn time, let g f the minus and plus buttns. After five secnds the cuntdwn will begin. An alarm will sund when the cuntdwn time has elapsed. The alarm can be silenced by pressing the minus buttn (2). Imprtant: The ven will cntinue t heat nce the alarm has been silenced. If yu have finished cking, then yu shuld turn the ven functin selectr and thermstat cntrl knb t 0. Using the ven Befre first use T remve any residue frm the ven that may have been left frm the manufacturing prcess, yu shuld select either the main r grill ven functin and turn the thermstat dial t its maximum temperature setting. It is perfectly nrmal fr a smell t be prduced during this prcess. 13

14 Yu shuld make sure that any windws in the rm are left pen during this prcess. It is advisable fr yu nt t remain in the rm whilst the burning ff prcess is taking place. Yu shuld leave each ven n maximum setting fr minutes. IMPORTANT: Yu shuld nt burn ff bth vens simultaneusly. After bth cavities have cled, they shuld then be cleaned with warm sapy water, using either a spnge r sft clth. N abrasive cleaners shuld be used. Outer parts f the ven shuld be cleaned with warm sapy water, using either a spnge r sft clth. N abrasive cleaners shuld be used. We wuld recmmend that an apprpriate stainless steel cleaner and plish is regularly used n the stainless steel surfaces f this appliance. Using the main ven T turn the main ven n, press and turn the cntrl dial t the large flame psitin under the wrd OVEN. While still hlding the dial inwards, press and hld the bttm half f the ignitin buttn until the ven burner ignites. If the flame ges ut, repeat all the steps abve keeping the dial pressed in fr abut five secnds lnger. 14

15 Once the burner is lit, turn the knb t a setting frm 1 t 8 t set the temperature. The table belw shws what setting yu shuld select fr the crrespnding ven temperature: Setting Temp ( C) The ven light can be turned n anytime by pressing the tp half f the ignitin buttn. Press this buttn again t switch the light ff. The ven has a flame failure safety device t ensure that n gas escapes if the flames are extinguished. There is als a thermal cut-ff which prevents the ven frm verheating if the temperature exceeds safety limits. Warning: When lighting the ven burner r grill burner with a match, take care t avid burns. Yu shuld nt place fd inside the cavity, until the crrect cking temperature has been reached. Base burner appliances IMPORTANT: Yur appliance is a Cntinental style/base burner gas ven, please fllw the guidance belw, t achieve the best cking results. There are tw different types f heating methds fr gas vens, traditinal U.K. style and Cntinental style. In U.K. style gas vens, the ht air mves arund the ven and the httest part f the cavity is at the tp. In Cntinental style gas vens, the heat surce is underneath the base f the ven, which means that the httest part f the cavity is at the bttm. Yur ven is a Cntinental style gas ven, which may require sme adjustment in yur cking methd, if yu are used t a U.K. style gas ven. We wuld recmmend that yu place the enamelled baking tray int the lwest shelf psitin. This will deflect sme f the fierce heat generated by the base burner away frm the fd that yu are cking. 15

16 This will allw fd t ck all f the way thrugh, withut getting burnt n the base. Yu may als need t make small adjustments t the cking temperature and cking times that yu nrmally used previusly. Using the grill T turn the grill n press and turn the cntrl dial t the large flame psitin under the wrd GRILL. While still hlding in the cntrl knb, press and hld the bttm half f the ignitin buttn until the grill burner ignites. Fr a high heat temperature, leave the cntrl n the large flame symbl. T set a lwer heat level, turn the cntrl dial t the small flame psitin. Yu can turn the light n any time by pressing the bttm half f the ignitin buttn. Press this buttn again t turn the light ff. The grill has a flame failure safety device. This ensures that n gas escapes if the flames are extinguished. There is als a thermal cut-ff which prevents the grill frm verheating if the temperature exceeds safety limits. Always remember t use the handle when remving the grill pan and d nt leave the grill unattended while in use. IMPORTANT: Yu shuld always grill with the ven dr pen. NEVER attempt t grill with the dr clsed. 16

17 Cking guidelines Please refer t the infrmatin given n fd packaging fr guidance n cking temperatures and times. Once familiar with the perfrmance f yur appliance, temperatures and times can be varied t suit persnal preference. Make sure that frzen fds are thrughly thawed befre cking, unless the instructins n the fd packaging advise that yu can ck frm frzen. Yu shuld pre-heat the ven and nt place fd inside f it is prperly heated. Befre cking, check that any unused accessries are remved frm the ven. Place cking trays in the centre f the ven and leave gaps between the trays t allw air t circulate. Try t pen the dr as little as pssible t view the dishes. Warnings During cking, never place pans r ckware directly nt the bttm f the ven. They shuld always be placed n the shelves prvided. The grill heating element becmes extremely ht during peratin, avid tuching it inadvertently when handling the fd which yu are grilling. Imprtant: Be careful when pening the dr, t avid cntact with ht parts and steam. IMPORTANT: In case f fire, clse the main valve f the gas supply and switch ff the electricity supply t the appliance. NEVER pur water nt burning il. 17

18 Using the hb tp Befre first use IMPORTANT: Yu shuld clean the hb surface (see Cleaning and maintenance sectin). Yu shuld switch n ne cking zne at a time, fr 5 minutes at the maximum setting. This will help t eliminate any new smell that exists and evaprate any humidity that has frmed n the heating elements during transit. D nt burn ff mre than ne zne at nce. Yu must place a saucepan filled half full with cld water n each zne as yu burn it ff. Using the hb tp znes Each zne n the gas hb tp is cntrlled by a cntrl knb. T turn n a cking zne use the relevant cntrl knb fr the zne yu wish t use. Press and turn the cntrl knb t the large flame psitin. While still pressing in the cntrl knb, press and hld the bttm half f the ignitin buttn until the burner ignites. Fr a maximum temperature keep the dial turned t the large flame psitin. 18

19 Fr simmering, lwer the heat by turning the cntrl dial t the small flame psitin. Always remember t turn the cntrl knb t OFF when cking is cmpleted. Hb guidelines The diameter f the bttm f the pan shuld crrespnd t that f the burner. The burner flame must never extend beynd the diameter f the pan. Use flat bttmed pans nly When pssible, keep a lid n the pan whilst cking. Ck vegetables with as little water as pssible, t reduce cking times. IMPORTANT: Always place pans centrally ver the hb burners and psitin them s that the handles cannt get accidentally caught r kncked ff. Yu shuld als make sure that the handle is nt ver ne f the ther hb burner flames. Cleaning and maintenance Cleaning peratins must nly be carried ut when the ven is cl. The appliance shuld be discnnected frm yur mains supply befre cmmencing any cleaning prcess. The ven shuld be thrughly cleaned befre it is perated fr the first time and after each use. This will avid residual fd stuffs becming baked n the ven cavity. After residues have been baked n several times, they are far mre difficult t remve. Never clean the ven surfaces by steam cleaning. 19

20 The ven cavity shuld nly be cleaned with warm sapy water, using either a spnge r sft clth. N abrasive cleaners shuld be used. Any stains that may appear n the bttm f the ven will have riginated frm fd splashes r spilt fd, these splashes ccur during the cking prcess. These culd pssibly be a result f the fd being cked at an excessively high temperature r being placed in ckware that is t small. Yu shuld select a cking temperature that is apprpriate fr the fd that yu are cking. Yu shuld als ensure that the fd is placed in an adequately sized dish and that yu use the enamelled baking tray where apprpriate. Outer parts f the ven shuld nly be cleaned with warm sapy water, using either a spnge r sft clth. N abrasive cleaners shuld be used. We wuld recmmend that an apprpriate stainless steel cleaner and plish is regularly used n the stainless steel surfaces f this appliance. If yu use any frm f ven cleaner n yur appliance, then yu must check with the manufacturer f the cleaner that it is suitable fr use n yur appliance. Any damage that is caused t the appliance by a cleaning prduct will nt be fixed by Baumatic free f charge, even if the appliance is within the guarantee perid. Cleaning the gas hb tp Remve the dirty pan supprts frm the hb and place in warm sapy water fr sme time. Then wash and dry befre replacing. After each use Wipe the appliance ver with a damp clth and a little washing up liquid. Dry the appliance by rubbing the surface with a clean clth. 20

21 Cleaning the burners Gas burners shuld be cleaned regularly and after each spillage t remve cking residues and dirt. T clean the burners, remve the caps and rings and place them separately in warm sapy water. After cleaning them, check that the burner prts are clear. The bdy near the nzzle shuld always be clean. Dirt accumulating arund the nzzle may clg it, as a result f which the burner will nt light r will light nly with a small flame. T clean the nzzle use a brush saked in slvent. Dry all the elements f the burner carefully as wet elements may nt light prperly. Assemble the clean and dry burners carrying ut the disassembly steps in reverse rder. Cleaning the ven The ven cmpartment is cated with vitreus enamel. T clean particularly difficult burnt spts a special ven cleaning agent may be used. Hwever, as these agents are caustic, be careful when using them and fllw the manufacturer s guidelines. Warning: D nt steam pressure clean the ven. Always wait until the ven cls dwn befre cleaning. 21

22 Replacing the ven bulb IMPORTANT: The ven must be discnnected frm yur mains supply befre yu attempt t either remve r replace the ven bulb. D nt use any ther type f bulb. Remve all ven shelves and the drip tray. Unscrew the lamp cver. Unscrew the bulb and remve it frm its hlder. Replace the bulb with a 15 W/300 C, screw type pygmy. Screw the lamp cver back int its riginal psitin. Remving the ven dr fr cleaning T facilitate the cleaning f the inside f the cker and the uter frame f the ven, the dr can be remved as fllws:- The hinges (A) have tw mvable blts n them (B). If yu raise bth f the mvable blts (B), then the hinges (A) are released frm the ven husing. Yu shuld grip the sides f the dr at the centre and then incline it slightly twards the cker cavity and then pull it gently away frm the cker cavity. IMPORTANT: Yu shuld make sure that the dr is supprted at all times and that yu place the dr n sme padded material whilst cleaning it. 22

23 The ven dr and dr glass shuld nly be cleaned using a damp clth and a small amunt f detergent. The clth MUST NOT have cme int cntact with any frm f cleaning prduct r chemical previusly. T refit the dr yu shuld slide the hinges back int their slts and pen the dr fully. IMPORTANT: The mvable blts (B) must be clsed back int their riginal psitins befre clsing the dr. Take care nt t disldge the hinge lcking system when remving the dr, as the hinge mechanism has a strng spring. D nt immerse the dr in water at any time. Installatin The installatin must be carried ut by a suitably qualified persn, in accrdance with the current versin f the fllwing. UK Regulatins and Safety Standards r their Eurpean Nrm Replacements. Building Regulatins (issued by the Department f the Envirnment). Building Standards (issued by the Scttish Develpment Department). IEE Wiring Regulatins. Electricity At Wrk Regulatins. Gas Safety (Installatin and Use) (Amendment) Regulatins. 23

24 Psitining The adjacent furniture and all materials used in the installatin must be able t withstand a minimum temperature f 85 C abve the ambient temperature f the rm it is lcated in, whilst in use. Yur appliance is heavy, s yu shuld be careful when mving r psitining it. D nt try t mve the cker by pulling n either the dr, handle r cntrl panel. The cker is designed t slt in between 600 mm deep cabinets, which are spaced apprximately 600 mm apart. It can als be used as freestanding, with a cabinet t ne side, in a crner setting r with its back t a wall. IMPORTANT: It shuld nt be installed at the end f a run f cabinets, if there is a cabinet at immediate right angles t the cker dr. The wall behind the cker and 450 mm abve and acrss the width f the cker shuld be an incmbustible material and preferably an easy clean surface, such as ceramic tiles. 24

25 Any verhanging surface r cker hd shuld be at least 700 mm abve the highest pint n the hb tp (including the burners). Baumatic d nt recmmend that the cker is psitined belw wall cupbards, as the heat and steam frm the appliance and what is being cked, may damage the cupbard and its cntents. The cker may be lcated in a kitchen, r a bedrm, but nt in a rm cntaining a bath r shwer. The cker must nt be installed in a bedrm f less than 20m³ in size. The cker is fitted with fur feet that can be adjusted t match the height f yur kitchen cabinets. If the cker is nt level r is unstable due t an uneven flr surface, use the adjustable feet t alter each crner until the cker is level. Ventilatin requirements The rm cntaining the appliance shuld have an air supply in accrdance with BS 5440: Part 2. Fr rm vlumes up t 5m³ an air vent f 100cm² is required. If the rm has a dr that pens directly t the utside, r the rm exceeds 10m³ n air vent is required. Fr rm vlumes between 5m³ and 10m³ an air vent f 50cm² is required. 25

26 Safety chain anchrs In rder t eliminate the risk f the ven falling frward, tw chains have been installed at the rear f the cker. Befre use, these will need t be fastened securely t the wall behind the appliance with the anchr brackets supplied. Decide n a suitable wall lcatin fr fitting the anchr brackets directly behind each cker safety chain. Hld the chain anchr up t the wall where it will be required and mark the fixing hles. Drill the fixing hles and fix the chain anchrs t the wall using the screws prvided and suitable wall plugs fr the type f wall being fixed t. Leave the chains unattached until the installatin prcess has been cmpleted. 26

27 Securing the safety chains Befre securing the safety chains, check that yu have cmpleted the installatin prcess and that all cnnectins have been made successfully and that the cker is in its final perating psitin. T fix the security chains t their anchr brackets: Unscrew the hex nut at the unattached end f the safety chain. Insert the screw upwards int the tp hle f the anchr bracket. When the screw is fully inserted in the bracket, tighten the hex nut t secure the end chain link int psitin. 27

28 Electrical cnnectin YOUR COOKER IS INTENDED FOR FITTED AND PERMANENT INSTALLATION. Befre cnnecting the appliance, make sure that the supply vltage marked n the rating plate crrespnds with yur mains supply vltage. We recmmend that the appliance is cnnected by a qualified electrician, wh is a member f the N.I.C.E.I.C. and wh will cmply with the I.E.E. and lcal regulatins. WARNING: THIS APPLIANCE MUST BE EARTHED. This appliance is supplied with a mulded plug, which must be cnnected t an earthed scket. If in future yu need t change the fuse in this plug, then a 3 amp ASTA apprved (BS 1362) fuse must be used. If the earthed scket is nt accessible after the appliance is installed. Then the cker must be wired int a 13 A duble ple switched fused spur utlet, having 3 mm cntact separatin and the fuse rating reduced t 3 amps. This shuld be placed in an easily accessible psitin adjacent t the appliance. The spur utlet must still be accessible even when yur cker is installed. The wiring in the mains lead is clured as fllws: Brwn Blue Green and yellw Live Neutral Earth As the clurs f the wires in the appliance s mains lead may nt crrespnd with the clured markings identifying the terminals in yur spur bx, please prceed as fllws: The brwn wire must be cnnected t the terminal marked L (live), r clured red. The blue wire must be cnnected t the terminal marked N (neutral), r clured black. The green and yellw wire must be cnnected t the terminal marked E (earth), r by the earth symbl, r clured green and yellw. 28

29 When the cnnectin is cmpleted, n stray strands r cut wire shuld be present. The crd clamp must be secured ver the uter sheath. Brken r damaged pwer leads must nly be replaced by a suitably qualified persn. A pwer lead f a similar type must be used in replacement. Gas cnnectin This appliance must be installed by a cmpetent persn in accrdance with the current versins f the fllwing UK (United Kingdm) r ROI (Republic f Ireland) Regulatins and Safety Standards r their Eurpean Nrm Replacements. Imprtant infrmatin This cker is supplied t run n natural gas nly and cannt be used n any ther type f gas withut mdificatin. Cnversin fr use n LPG and ther gases must nly be undertaken by a qualified persn. Fr infrmatin n the use f ther gases, please cntact the Baumatic Technical Department. The cker must be installed by a qualified persn, in accrdance with the current editin f the Gas Safety (Installatin and Use) (Amendment) Regulatins and the relevant building/i.e.e. Regulatins. Failure t install the appliance crrectly culd invalidate Baumatic s guarantee and lead t prsecutin under the regulatins quted abve. In the UK, GASSAFE registered installers are authrised t undertake the installatin and service wrk, in cmpliance with the abve regulatins. 29

30 Gas Safety (Installatin and Use) Regulatins It is the law that all gas appliances are installed by cmpetent persns in accrdance with the current editin f the Gas Safety Installatin and Use Regulatins. It is in yur interest and that f safety t ensure cmpliance with the law. In the UK, GASSAFE registered installers wrk t safe standards f practice. The cker must als be installed in accrdance with the current editin f BS Failure t install the cker crrectly culd invalidate the warranty, liability claims and lead t prsecutin. IMPORTANT: It is a requirement fr a stability chain t be fitted t the appliance. Please see page fr mre detailed infrmatin n this. Gas cnnectin ALL INSTALLATION AND SERVICE WORK MUST BE CARRIED OUT BY A GASSAFE REGISTERED ENGINEER. Prir t installatin, ensure that the gas supply cnditins (nature f the gas and gas pressure) and the adjustment cnditins are cmpatible. The adjustment cnditins fr this appliance are stated n the rating plate which can be fund n the back cver. This appliance is nt designed t be cnnected t a cmbustin prduct evacuatin device. Particular attentin shuld be given t the relevant requirements regarding ventilatin. In cmpliance with the manufacturer s installatin instructins, the adaptr elbw shuld be cnnected t the gas inlet at the rear right crner f the appliance and pinting in a dwnward directin. As indicated in the diagram ppsite. 30

31 IMPORTANT: THE FIBRE WASHERS SHOWN IN THE ABOVE DIAGRAM MUST BE IN PLACE WHEN CONNECTING THE ADAPTOR ELBOW. Cnnectin t the cker shuld be made with an apprved appliance flexible cnnectin t BS 669. If the cker has been cnverted fr use with LPG, then it shuld be cnnected t the gas supply using an apprpriate baynet type hse. The hse MUST be suitable fr use with LPG gas, these are identifiable by a red band r stripe. A hse length f 0.9m t 1.25m is recmmended. The length f hse chsen shuld be such that when the cker is in psitin, the hse des nt tuch the flr. Care shuld be taken t ensure that the temperature rise f areas at the rear f the cker that are likely t cme in cntact with the flexible hse d nt exceed 70 C. Gas pressure may be checked n a semi-rapid hb burner. Remve the apprpriate injectr and attach a test nipple. Light the ther burners and bserve that the gas pressure cmplies with the gas standards in frce. This cker can be cnnected t the supply bth n the right and left hand side at the rear f the cker. T reverse the psitin, remve the blanking plug and refit it t the ppsite side t where the hse is being cnnected. 31

32 Gas adjustment (Cnversin t LPG fr the hb tp) All wrk must be carried ut by a GASSAFE registered engineer. IMPORTANT: Always islate the cker frm the electricity supply befre changing the injectrs and/r adjusting the minimum flw f the burners. Remve the pan supprts, burner cap and burner rings. Unscrew the injectr and replace it with the required injectr fr the new gas supply accrding t the table belw. Burner Type Auxiliary (Small) Semi Rapid (Medium) Rapid (Wk) Gas Type Pressure Mbar Injectr Marking (1/100mm) Pwer (Kw) Max Min Natural Gas Liquid Gas /37 50 Natural Gas Liquid Gas /37 65 Natural Gas Liquid Gas /37 90 When all fur jets have been replaced, reassemble all the burners carefully, taking particular care t make sure that the burners and burner caps are aligned prperly. After changing the injectrs YOU MUST change the minimum flw rate. 32

33 Minimum flw adjustment fr hb gas taps. All wrk must be carried ut by a GASSAFE registered engineer. Ignite the large (rapid) burner and set the cntrl knb t the minimum psitin. Remve the cntrl knb t access a small adjusting screw. Using a suitable screwdriver, turn the screw clckwise t decrease the flw f gas and make the flame smaller. Turn the screw anti-clckwise t increase the flw f gas and make the flame bigger. T establish the crrect adjustment, the flame shuld be apprximately 3 4 mm in length. Fr Butane / Prpane gas, the adjusting screw must be tightly screwed in. Refit the cntrl knb. Turn the cntrl knb t maximum and then back t minimum tw r three times t make sure the flame des nt g ut when the cntrl knb is set t minimum. If the flame des g ut then remve the cntrl knb and repeat the prcedure again. Repeat these steps fr the semi-rapid and auxiliary burners. 33

34 Gas adjustment (Cnversin t LPG fr the ven and grill) All wrk must be carried ut by a GASSAFE registered engineer. IMPORTANT: Always islate the cker frm the electricity supply befre changing the injectrs and/r adjusting the minimum flw f the burners. Befre yu can change the injectrs n the grill and ven burners, yu must unscrew the burners frm their fixing brackets. Grill burner Oven burner The grill burner is lcated at the tp f the cavity and the ven burner is lcated under the bttm cavity. Yu shuld remve the metal plate t access the ven burner. When yu have remved the burners yu will be able t see the injectr. 34

35 Unscrew the injectr and replace it with the required injectr fr the new gas supply accrding t the table belw. Burner Type Oven Burner Grill Burner Gas Type Pressure Mbar Injectr Marking (1/100mm) Pwer (Kw) Max Min Natural Gas Liquid Gas / Natural Gas Liquid Gas / After changing the injectrs YOU MUST change the minimum flw rate. Minimum flw adjustment fr the ven and grill burners All wrk must be carried ut by a GASSAFE registered engineer. In rder t access the adjusting screws t change the minimum flw rate f the grill and ven burners, yu need t remve the hb tp and cntrl panel. 35

36 T take the hb tp ff, remve the screws fixing the hb t the cker. W h e n a ll the screws have been remved, slide the hb frm the back t the frnt and lift it ff the supprt brackets which hld the hb dwn at the frnt f the cker. T take ff the cntrl panel, remve the screws fixing the cntrl panel. 36

37 When the screws have been remved, yu can take ff the cntrl knbs and remve the cntrl panel by pulling it t the frnt. Lcate the adjusting screws fr the grill and ven burners. These will be psitined t the left hand side f the grill and ven thermstat taps. With the cntrl panel remved, refit the ven and gas thermstat cntrl knbs. Ignite each burner separately and set the cntrl knb t the minimum psitin. Using a suitable screwdriver, turn the screw clckwise t decrease the flw f gas and make the flame smaller. Turn the screw anti-clckwise t increase the flw f gas and make the flamer bigger. T establish the crrect adjustment, the flame shuld be apprximately 3-4 mm in length. Fr Butane / Prpane gas, the adjusting screw must be tightly screwed in. Turn the cntrl knb t maximum and then back t minimum tw r three times t make sure that the flame des nt g ut when the cntrl knb is set t minimum. If the flame des g ut, repeat the prcedure again. Remve the cntrl knbs fr the ven and grill and refit the cntrl panel and hb tp taking care t ensure they are fitted crrectly. Replace all the cntrl knbs. Yur cker shuld nw be adjusted crrectly t wrk n LPG gas. 37

38 My appliance isn t wrking crrectly The gas ven burner r grill burner d nt light. * Check that the ven is switched n at yur mains supply. * Check that the fuse in the spur utlet desn t need replacing. * Check that there is nt a prblem with yur gas supply Fd is cking t quickly r t slwly. * Check that yu are cking at an apprpriate temperature and shelf level. The ven is nt cking evenly. * Check that the ven is installed crrectly. * Check that yu are cking at an apprpriate temperature and shelf level. The ven light is nt wrking. * Refer t the Replacing the ven bulb sectin. I am getting cndensatin in my ven. * Steam and cndensatin is a natural by prduct f cking any fd with high water cntent, such as frzen fd, chicken etc. * Yu may get cndensatin in the ven cavity and frming between the ven dr glasses. This is nt necessarily a sign that the ven is nt wrking crrectly. * D nt leave fd in the ven t cl after it has been cked and the ven has been switched ff. * Use a cvered cntainer, where practical, when cking t reduce the amunt f cndensatin that frms. 38

39 IMPORTANT: If yur appliance appears nt t be perating crrectly, then yu shuld discnnect it frm yur mains supply and then cntact Baumatic Custmer Care n telephne number (0118) DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please nte that if an engineer is asked t attend whilst the prduct is under guarantee and finds that the prblem is nt the result f an appliance fault, then yu may be liable fr the cst f the call ut charge. The appliance must be accessible fr the engineer t perfrm any necessary repair. If yur appliance is installed in such a way that an engineer is cncerned that damage will be caused t the appliance r yur kitchen, then he will nt cmplete a repair. This includes situatins where appliances have been tiled in, sealed in with sealant, have wden bstructins placed in frnt f the appliance, like plinths. Or any installatin ther than the ne specified by Baumatic Ltd. has been cmpleted. Please refer t the cnditins f guarantee that appear n the warranty card that yu receive with the appliance. 39

40 Baumatic Cnsumables BC001 Degreaser fr Dishwashers (200 g) BC002 Descaler fr Washing Machines and Dishwashers (200 g) BC003 Ceramic Hb Cleaner (250 ml) BC004 Oven Cleaner (250 ml) BC005 Stainless Steel Cleaner and Prtectr (250 ml) BC007 E-Clth General Purpse Clth BC008 Micrwave Cver T rder a Baumatic cnsumable prduct please call and qute the prduct cde. Yu can als rder nline frm eshp.baumatic.c.uk 40

41 United Kingdm Baumatic Ltd., Baumatic Buildings, 6 Bennet Rad, Reading, Berkshire RG2 0QX United Kingdm Sales Telephne (0118) Sales Fax (0118) Custmer Care Telephne (0118) Custmer Care Fax (0118) Spares Telephne (01235) Advice Line Telephne (0118) sales@baumatic.c.uk custmercare@baumatic.c.uk spares@baumatic.c.uk technical@baumatic.c.uk Website: Facebk: Republic f Ireland Service Telephne Spares Telephne Czech Republic/Slvakia Baumatic s.r.. Lípvá 665/ Liberec 4 Czech Republic Panenská Bratislava - Staré Mest Slvakia (CZ) (SK) Germany Kundendienst & Ersatzteile Deutschland 0049(0) Oesterreich +43 (0) 820 / Italy Baumatic Italia S.R.L. Via Galvani N Campdarseg (PD) Hlland Baumatic Benelux B.V. Dukdalfweg 15d 1332 BH ALMERE Nederland +31(0)

42 42

43 43

44 44